 | Dr. Badih Ali JawadDepartment Chair |
Education
Career History
Projects & Grants
Doctoral of Engineering Academic Advising
Selected Publications
Presentations
Proposals
Reports
Special Training
Honors & Awards
Scientific & Professional Societies
Education
Ph.D. in Chemical Engineering, Wayne State University, Detroit, MI
* Dissertation Title: "Penetration and Drop Size Measurements of Intermittent Sprays by an Optical Obscuration Technique"
M.S. in Chemical Engineering, Wayne State University, Detroit, MI
M.S. in Mechanical Engineering, Wayne State University, Detroit, MI
B.S. in Mechanical Engineering, Wayne State University, Detroit, MI
Career History
| Lawrence Technological University, Southfield, Michigan | Sept 96 - Pres |
| Interim Chair, Mechanical Engineering Department | Sept 09 - Pres |
| Director, Doctor of Engineering in Mechanical Engineering | Sept 06 - Pres |
| Professor, Mechanical Engineering Dept | Sept 06 - Pres |
| University Faculty Senate | Sept 06 - Pres |
| Engineering Faculty Council | Sept 05 - Pres |
| Faculty and Staff Campaign Co-chair | Sept 03 - Sep 05 |
| Associate Professor, Mechanical Engineering Dept | Sept 02 – Aug 06 |
| Director, Master of Science in Mechanical Engineering | Sept 02 - Pres |
| Director, University Assessment Program and Chair | Sept 01 - Aug 05 |
| Formula SAE & Supermileage Faculty Advisor | Sept 96 - Pres |
| University Graduate Council, Chair | Sept 00 - Aug 01 |
| University Graduate Council (Engineering College Representative) | Sept 98 - Aug 02 |
| Assistant Professor, Mechanical Engineering Dept | Sept 96 - Aug 02 |
| Lecturer, Mechanical Engineering Dept | Sept 85 - Aug 96 |
| DaimlerChrysler | |
| Chrysler Technology Center, Auburn Hills | May 07 – Aug 07 |
| Panel Stiffness Evaluation (Oil Canning Studies) | |
| Professor Summer Internship Program | |
| *Chrysler Technology Center, Auburn Hills | May 06 – Aug 06 |
| Tools Certification and Validation | |
| Professor Summer Internship Program | |
| Eight Mile & Connor Avenue Viper Plant | May 05 – Aug 05 |
| Viper Chassis and Trim Line Torque Project | |
| Professor Summer Internship Program | |
| Mt. Elliott Tool & Die Manufacturing Facility | May 98 – Aug 98 |
| MET & D QS-9000 Audit Open Issues for Certification | |
| ServoTech Simulation, Inc., Belleville, Michigan | |
| Research and Development Consultant | Aug 93 - May 96 |
| Design of charcoal canisters purging systems to run engine on fuel vapor at engine Cold Start with fuel injectors off to reduce emissions (A project for Ford Motor Company). | |
| Design of catalytic convertors to oxidize the Unburnt Hydrocarbons at engine cold start, instantaneously, by passing the feed gas through a high energy curtain (A project for Ford Motor Company). | |
| The University of Michigan-Dearborn, Dearborn, Michigan | 1990 - 1996 |
| Lecturer, Mechanical Engineering Department | |
| Wayne State University, Detroit, Michigan | 1988 - 1990 |
| Lecturer, Mechanical Engineering Department | |
| Conducting research on characterization of light scattering in two-phase systems of fuel-alchohol-water mixtures, M85 flexible fuel. (A project for Ford Motor Company). | |
| Chrysler Corporation, Highland Park, Michigan | 1978 - 1982 |
| Research and Product Development Engineer, Cooling Systems Department | |
| Design and model of vehicle front end air flow systems | |
| Wayne State University, Detroit, Michigan | |
| Part-Time Faculty, Chemical Engineering Department | Fall 1987 |
| Research Assistant, Chemical Engineering Department | 1983-1987 |
| Sprays and Fuel Atomization using Laser Light Diffraction Techniques | |
| (A project for the U.S. Army Tank Command, Warren, Michigan) | |
| Undergraduate Advisor, Chemical Engineering Department | 1982-1983 |
| Research Assistant, chemical Engineering Department/Energy Center | 1976-1977 |
| Fischer Assay of Michigan Oil Shale (A project for Dow Chemical Company, Midland, Michigan) | |
| Liquefaction of coal and design of coal oil slurry (A project for General Motors, Saginaw, Michigan) | |
| Teaching Assistant in Mechanical Engineering Department | 1972-1976 |
Projects & Grants
| Hybrid Electric Vehicle Testing and Data Analysis, TARDEC, | 2009 - 2010 |
Doctoral of Engineering Academic Advising
Dissertation Title: “Minimizing Cost of Variance in the Printed Circuit Board Assembly,” Naji E. Gebara, Doctoral Candidacy Exam Passed June- 25, 2004, Defended & Graduated February 20, 2006, DEMS.
Dissertation Title: “Design for Robustness of a Thin Walled Injection Molded Componentto Maximize Dimensional Stability and Reduce Warpage”, Steve Sobolak, Doctoral Candidacy Exam Passed July-7, 2004, Defended & Graduated November 19, 2006, DEMS.
Dissertation Title: “Institulization of Robust Design Methods in the Early Stage of Product Design Life Cycle,” Mohamed Nasser, Doctoral Candidacy Exam Passed May 11, 2006, Defended & Graduated May 3, 2007, DEMS.
Dissertation Title: “Application of Extreme Value Statistics for Predicting Engine Valve Spring Endurance Limit in Presence of Inclusions,” Hassan Choucair, Doctoral Candidacy Exam Passed December 19, 2006. Defended & Graduated April 29, 2008, DEMS.
Dissertation Title: “Effect of Elastomer Rheology on Extrusion Die Design,” Jean Younes, Doctoral Candidacy Exam Passed May-25, 2004, DEMS.
Selected Publications
"Analyzing Field Failures of Engine Valve Springs in Presence of Non Metallic Inclusions by Applying Statistical and Fracture Mechanics Models," H. Choucair and B. Jawad, 2008, ASME International Engineering Congress and Exposition, Paper No.IMECE2009-10060.
"Simulation & Modeling as Effective Product Design Tools," M. Nasser and B. Jawad 2009 ASME International Engineering Congress and Exposition, Paper No.IMECE2009-10059.
"Analyzing Field Failures of Engine Valve Springs in Presence of Non Metallic Inclusions by Applying Statistical and Fracture Mechanics Models," H. Choucair and B. Jawad, 2009 SAE International Congress and Exposition Meeting, Detroit, Michigan, April 2009, SAE paper number 2009-01-0528.
"Performance Advantages of a Dry Sump Lubrication System," B. Jawad, M. Hastings, and B. Johnson, Cairo 11th International Conference on Energy & Environment, March 2009.
"Design of Experiments as Effective Design Tools," M. Nasser and B. Jawad, 2008 ASME International Engineering Congress and Exposition, Paper No.IMECE2008-68840.
"Developing a Transfer Function for Vehicle Ride Performance," M. Nasser and B. Jawad, 2008 SAE International Congress and Exposition Meeting, Detroit, Michigan, March, SAE paper number 2008-01-1280, SP-2190m SAE Int. J. Passeng. Cars – Mech. Syst. 1(1): 1003 – 1008, 2009.
"Shrinkage Analysis of a Constrained Thin Walled Injection Molded Component Using a Traditional Flatbed Scanner and Photometric Techniques," S. Sobolak and B. Jawad, 2008 SAE International Congress and Exposition Meeting, Detroit, Michigan, March, SAE paper number 2008-01-1447, SP-2190.
"Reducing Material Waste Using Six Sigma in printed Circuit Board Assembly," N. E. Gebara and B. A. Jawad, 2007 ASME International Engineering Congress and Exposition, Paper No. IMECE2007-42680.
"Anistropy Study of a Constrained Thin Walled Component Using a Range of Processing Control Factors," S. J. Sobolak and B. A. Jawad, 2007 ASME International Engineering Congress and Exposition, Paper No. IMECE2007-42776.
"Warpage Reduction Through Robust Engineering of a Thin-Walled Injection Molded Component," S. J. Sobolak and B. A. Jawad, 2007 ASME International Engineering Congress and Exposition, Paper No. IMECE2007-42775.
"Analysis of Sauter Mean Diameter (SMD) for Fuel Sprays," B. A. Jawad, and C.H. Riedel, 2007 ASME – JSME Fluids Engineering Summer Meeting, San Diego, California, July 30 – August 2, ASME paper no. FED2007-37643.
"Dimensional Stability and Warpage Reduction in Conventional Injection Molding Through Process Changes," Steven J. Sobolak and B. Jawad, Modelling and Simulation, (IASTED), paper no. 567-078, pp. 567-078, pp. 538-543, 2007.
"Minimizing Cost of Material Variances in Printed Circuit Board Assembly," N. Gebara, B. Jawad, and P. Szymanski, 2007 SAE International Congress and Exposition Meeting, Detroit, Michigan, March, SAE paper 2007-01-0781. SAE Transactions Journal of Passenger Cars – Electronic and Electrical Systems, Section 7, pp. 247 - 254.
"Effect of Temperature on Weld Strength in Chrome Moly Space Frames," J. Wood, B. Jawad, and C. Riedel, 2006 SAE Motorsports Engineering Conference & Exhibition, SAE paper 2006-01-3648.
"Spray Size Evolution of Diesel Sprays," B. A. Jawad, and C.H. Riedel, 2006 ASME Joint U.S. - European Fluids Engineering Summer Meeting, Miami, Florida, July 17 – 20, ASME paper no. FED2006-98433.
"Maximizing Weld Strength in Chrome Moly Space Frame," J. Wood, B. Jawad, and C. Riedel, Modelling and Simulation, (IASTED), paper no. 530-173, pp. 291-295, 2006.
"Spray Penetration and Drop Size Studies of Diesel Fuels," B. A. Jawad, C.H. Riedel, and A. Bazzari, 2005 ASME International Engineering Congress and Exposition, Paper No. IMECE2005-79437.
"Impact of Reduced Rotating Mass to Throttle Response in a CBR600F4i Engine, " T. Johnson, B. Campbell, G. Gibson, and B. Jawad , 2005 SAE Future Transportation Technology Conference, Chicago, Illinois, SAE paper 2005-01-3448.
"Diesel Spray Analysis," B. A. Jawad, C.H. Riedel, and A. Bazzari, 2005 ASME Summer Heat Transfer Conference, San Francisco, California, ASME paper no. HT2005-72807.
"Sprat Penetration and Drop Size Analysis," B. A. Jawad, C.H. Riedel, and A. Bazzari, 2005 ASME Fluids Engineering Summer Conference, Houston, Texas, ASME paper no. FED2005-77461.
"Engine Performance at Different Air/Fuel Mixture Temperatures," B. Jawad, K. Adams, J. Leino, C. Riedel, and A. Bazzari, Modelling and Simulation, (IASTED), paper no. 459-101, pp. 434– 437, 2005.
"Determination of Particle Size Distribution Using Laser Diffraction Technique," B.A. Jawad, C. H. Riedel, and A. A. Bazzari, 2004 ASME International Engineering Congress and Exposition, Paper No. IMECE2004-60510.
"Small Engine Cooling and the Electric Water Pump," B. A. Jawad, K. Zellner and C. Riedel, 2004 SAE Small Engine Technology Conference, SAE paper 2004-32-0084.
"Particle Sizing Using Laser Diffraction," B. A. Jawad, C.H. Riedel, and A. Bazzari, 2004 ASME Heat Transfer/Fluids Engineering Conference, Charlotte, North Carolina, ASME paper no. HT-FED2004-56567.
"Communication Skills Assessment: Tools, Measures, analysis, and Closing the Loop," B.A. Jawad, D. Carpenter, M. Vaz, and K. Kelch, The Higher Learning Commission: A Commission of the North Central Association of Colleges and Schools, Assessment of Student Learning, Vol. 3, pp. 74-77, Chicago, Illinois, March 27 – 30, 2004.
"Cylinder Head Intake Flow Analysis," B. Jawad, J. W. Bradford, and C. H. Riedel, Control and Applications, (IASTED), paper no. 441-059, pp. 123 – 127, 2004.
"Physical Testing Versus FEA for a Space Frame," A. Minter, E. Chedid, B. Jawad, and C. Riedel, Modelling and Simulation, (IASTED), paper no. 414-801, pp. 180 – 183, 2004.
"Throttle Body Design for Optimum Driver Feedback ," B. Jawad , A. Dragoiu, L. Dyar, and K. Zellner, 2003 SAE Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2003-01-2278.
"Intake Design for Maximum Performance," B. Jawad , A. Dragoiu, L. Dyar, and K. Zellner, 2003 SAE Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2003-01-2277.
"The Engagement of Faculty in a University Wide Assessment Program that Transcends Professional Accreditation Boards," D. Carpenter and B. Jawad, Best Assessment Processes, Vol. V, pp. 1 – 7, Rose Hulman Institute of Technology, Terre Haute, Indiana, April 24 – 26, 2003.
"A Balancing Act: Engaging Faculty and Administration in University-Wide Assessment," D. Carpenter and B. Jawad, The Higher Learning Commission: A Commission of the North Central Association of Colleges and Schools, Vol. 3, Promoting Student Learning and Effective Teaching, Chapter 2, Assessment Processes, pp. 81-82, Chicago, 2003.
"The Study of a Cockpit with a Fixed Steering Wheel Position: Methods and Model," M. Way Lehto, N. Berndt, and B. Jawad, 2003 SAE Human Digital Modeling Conference, Montreal, Canada, SAE paper 2003-01-2180.
"Component Driveline Design for a Formula SAE Car," B.A. Jawad , L. Buie Jr., and C. Martin, Modelling and Simulation, paper no. 380-034, pp. 437 – 443, 2003.
"Exhaust System Design for a Four Cylinder Engine," B. A. Jawad, C. Biggs and B. Klein, Motorsports Engineering Conference & Exhibition, SAE paper 2002-01-3316.
"Suspension Component Design for a Formula SAE Race Vehicle," B. A. Jawad and J. Baumann, Motorsports Engineering Conference & Exhibition, SAE paper 2002-01-3310.
"Design of Formula SAE Suspension Components," B. A. Jawad and B. Polega, Motorsports Engineering Conference & Exhibition, SAE paper 2002-01-3308.
"Internal Improvements to Maximize Horsepower in 2002 FSAE Base Engine," B. A. Jawad and R. Smith, Motorsports Engineering Conference & Exhibition,SAE paper 2002-01-3295.
"Effectively Approaching and Designing a Suspension With Active Damping," B. A. Jawad and J. Todd, Motorsports Engineering Conference & Exhibition, SAE paper 2002-01-3285.
"Analysis of Intermittent Sprays," B.A. Jawad, ASME Heat Transfer Division, Combustion, Fire, and Computational Modeling of Industrial Combustion Systems, FACT-Vol. III/Fuels and Combustion Technologies, Paper No. IMECE2002-39319.
"Using a Web-Based Solution to Monitor Plant Equipment and Resolve Downtime Issues," B. Jawad, K. King, A. Bazzari, and A. Sakr, Applied Modelling and Simulation, paper no. 353-038, pp. 163 – 166, 2002.
"Project Management, Planning and Design of a Formula SAE Race Car," B. A. Jawad, J. DiGrande and J. Timmer, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 999-1004, Bangkok, Thailand 2002.
"Manufacturing and Assembly of a Formula SAE Race Car," B. A. Jawad, J. Pardee and J. Goodfellow, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 757-762, Bangkok, Thailand 2002.
"A Comparison of a Spray Penetration Correlation by an Optical Obscuration Technique to Other Correlations Obtained by Different Techniques," B. A. Jawad, 2002 ASME Fluids Engineering Conference, Montreal, Canada, ASME paper no. FEDSM02002-31174.
"Continuously Variable Transmissions For Automobiles," B. Jawad, J. Goodfellow, J. Pardee, Modelling and Simulation, paper no. 353-038, pp. 122 – 126, 2002.
"Formula SAE Dual Plenum Induction System Design," B.A. Jawad , J.P. Hoste, and B.E. Johnson, 2001 SAE International Congress and Exposition Meeting, Detroit, Michigan, March, SAE paper 2002-01-0457.
"The Impact of Aerodynamics on Vehicle Performance in a Formula SAE Racing Style Vehicle," B.A. Jawad , M.M. Longnecker, and J.S. Timmer, 2001 SAE Truck and Bus Meeting and Exposition, Chicago, Illinois, SAE paper 2001-01-2744.
"Aerodynamic Drag and Fuel Economy in a Formula SAE Racing Style Vehicle," B.A. Jawad , M.M. Longnecker, K. Nagy, and J.S. Timmer, 2001 SAE FutureTransportation Technology Conference, Costa Mesa, California, SAE paper 2001-01-2554.
"Intake System Design for a Formula SAE Application," B.A. Jawad , J.P. Hoste and B.E. Johnson, 2001 SAE Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2001-01-2553.
"Controlling Weight Transfer With Active Damping," B. Jawad , H. El-Khoury, J. Todd, and M. Masen, 2001 SAE Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2001-01-2552.
"Best Practices for a SAE Supermileage Vehicle," B. Jawad, E. Marck, D. Tingley, T. Salvati, J. McCoy, A. Ondes, E. Poota, and V. Floma, 2001 SAE Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2001-01-2469.
"Remote Data Acquisition Using Audio, Video and Data Transmission," B.Jawad, and Kevin Nagy, 2001 SAE Future Technology Conference, Costa Mesa, California, SAE paper 2001-01-2467.
"Lubricating Coolers for Industrial Applications," B. Jawad, A. Lungu, C. Race, C. Hannenberg, D. Pickler, L. Terk, Modelling and Simulation, paper no. 327-084,pp. 247 – 252, 2001.
"Aerodynamic Evaluation on Formula SAE Vehicles," B.A. Jawad , and M. M. Longnecker, 2001 SAE International Congress and Exposition Meeting, Detroit, Michigan, March SAE paper 2001-01-1270.
"Evaluation of Intake Design for a Small Engine Formula Vehicle," B.A. Jawad , L. Lounsbery, J. Hoste, SAE 2001 Transactions, Journal of Engines, Section 3, pp. 1318 – 1325, 2001 SAE International Congress and Exposition Meeting, Detroit, Michigan, March, SAE paper 2001-01-1211.
"An Adjustable Aluminum Differential," B.A. Jawad , D. C. Marcuzzi, and W.P. Canning, 2001 SAE International Congress and Exposition Meeting, Detroit, Michigan, March SAE paper 2001-01-0883.
"Traction Control Applications in Engine Control," B.A. Jawad, N. Hachem, S. Cizmic, J. Leese, and W. Bowerman, 2000 SAE International Truck and Bus Meeting and Exposition, Portland, Oregon, SAE paper 2000-01-3464.
"A Study on Diesel Fuel Drop Size Distribution," B.A. Jawad, ASME Heat Transfer Division, Combustion, Fire, and Computational Modeling of Industrial Combustion Systems, FACT-Vol. 23/HTD-Vol. 367, Book No. HO1198 – 2000, pp. 19 – 27.
"Motorcycle Electronic Fuel Injection Retrofit," B.A. Jawad , T. Kuzak, and D. Nash, submitted for review, 2000 SAE International Fall Fuels and Lubricants Meeting and Exposition, Baltimore, Maryland, SAE paper 2000-01-2914.
"Manufacture of a Formula SAE Steel Space Tube Frame with Consideration for Weight, Rigidity, and Impact Safety," B. A. Jawad, M. J. Puroll, D. V. Mazur, and M. R. Dziengowski, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 842-847, Southfield, Michigan, 2000.
"Formula SAE Suspension Design and Manufacturing," B. A. Jawad and B. A. Lenart, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 848-853, Southfield, Michigan, 2000.
"Evolution of a Race Car Differential," B. A. Jawad, B. Trimboli, M.Ziemke, and A. P. Young, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 854-858, Southfield, Michigan, 2000.
"Manufacture and Design of a Four Cylinder, High Speed FSAE Induction System," B. A. Jawad, A. P. Young, M. Degain, M. Ziemke, and B. Trimboli, Proceedings of the Pacific Conference on Manufacturing, Vol. II, pp. 859-863 , Southfield, Michigan, 2000.
"An Innovative Bicycle Roof Rack Using Sliding Rail Technology," B. A. Jawad , J. Perez, J. Bachler, R. Cramb, J. Notoci, and C. Yantus, 2000 SAE International Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2000-01-3089.
"Design of a Restricted Induction System for a High Speed Four Cylinder Engine," B. A. Jawad , M. DeGain, and A. P. Young, 2000 SAE International Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2000-01-3090.
"Formula SAE Race Car Cockpit Design: An Ergonomics Study for the Cockpit," B.A. Jawad , and E. Mariotti, 2000 SAE International Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2000-01-3091.
"Engine Control Inputs and Signal Conditioning for Crankshaft and Camshaft Positioning," B.A. Jawad , N. Hachem, W. Bowerman, J. Leese, and S. Cizmic, 2000 SAE International Future Transportation Technology Conference, Costa Mesa, California, SAE paper 2000-01-3092.
"Intermittent Spray Structure and Motion," B. A. Jawad, ASME, Fluids Engineering Conference, Boston, Massachusetts, ASME paper no. FEDSM02000-11057.
"A Comparison of Short Tube Restrictors and Expansion Valve Metering Devices for a Residential R-22 Cooling System ," B. A. Jawad, M. O. Davis, Modelling and Simulation, paper no. 308-085, pp. 74-78, 2000.
"Design of an Aluminum Differential for a Racing Style Car," B.A. Jawad , M. P. Ziemke, and A. P. Young, 2000 SAE World Congress, Transmission and Driveline Systems, SP-1522, SAE paper 2000-01-1156.
"Dynamics of Intermittent Sprays," B. A. Jawad, ASME Heat Transfer Division, HTD-Vol. 364-2, Book No. G1150B – 1999, pp. 355 – 362.
"Enhanced Settling by Inclination," B. A. Jawad ,and B.A. Trimboli, ASME paper no. FEDSM99-6986, 1999.
"Measurement of Convection Heat Transfer Coefficient for Forced Convection Past a Flat Disc," B. A. Jawad, C. O. Saenz, R. W. Prough, and P. Kalaj, Modelling and Simulation, paper no. 291-043pp. 625-629, 1999.
"Numerical Design of Racecar Suspension Parameters," D. E. Woods and A. Jawad, Government/Industry Meeting, Washington, D.C., SAE paper 1999-01-2257.
"Alternate Fuels: Not Only for Automobiles, Propane Conversion of a Residential Lawnmower," J. McIntosh and B. Jawad , Two-Stroke and Small Four-Stroke Engines and Emissions, SP-1421, pp. 1-6, SAE paper 1999-01-0281.
"A steady State Vehicle Model to Predict Engine and Transmission Performance," B. A. Jawad, B. A. Trimboli, and P. Ranspach, Transmission and Driveline Systems, SP-1440, pp. 65-72, SAE paper 1999-01-0742.
"Numerical Design of a Low Mass Differential Housing," B. A. Jawad, J. G. Fowler, L. M. Brandow, and B. A. Trimboli, Transmission and Driveline Systems Symposium, SP-1440, pp. 61-64, SAE paper 1999-01-0741.
"Redesign of a Differential Housing for a Small Formula Car (FSAE)," J. G. Fowler and B. A. Jawad, Motorsports Engineering Conference Proceedings, Vol. 2: Engines and Drivetrains, pp. 187-195, SAE paper 983077.
"Fuel Spray Characteristics and its Effect on Diesel White Smoke Emissions," B. A. Jawad and M. K. Yassine, Experimental Methods in Heat Transfer HTD-Vol. 361-5, ASME paper no. 98-WA/TE-8, 1998.
"Cold Temperature Effects on Spark Plug Performance," B. A. Jawad and S. J. Sobolak, Gasoline Performance and Additives, SP-1396, pp. 113-116, SAE paper 982725.
"Redesign of an Assembly Line Stop Mechanism," B. A. Jawad and B. Whittle, Pacific Conference on Manufacturing, pp. 346-351, 1998.
"Importance of Fuel Spray on Diesel White Smoke Emissions," B. A. Jawad and M. K. Yassine, ASME paper no. FEDSM98-5273, 1998.
"A study On Diesel Spray And White Smoke Formation," B. A. Jawad and M. K. Yassine, Advances in Engine Process, Combustion, and Fuels, Internal Combustion Engine-Vol. 30-3, ASME, Book No. G1074c, pp. 127-136, Paper No. 98-ICE-116, 1998.
"Redesign of an Assembly Line Stop Mechanism for an Automated Palletized Transport System," B. Whittle and B. A. Jawad, Advances in Product and Process Integration: Advanced Technology, SP-1337, pp. 31-41, SAE paper 980745.
"Drop Size Studies of Intermittent Fuel Sprays by an Optical Obscuration Technique," B. A. Jawad, ASME paper no. 97-WA/DE-22, 1997.
"Effect of Injection Pressure on Spray Atomization," B. A. Jawad, ASME, paper no. FEDSM97-3106, 1997.
"Fuel Injection Studies Using Fraunhofer diffraction Pattern Analysis," B. A. Jawad, Modelling and Simulation, paper no. 257-128, pp. 138-141, 1997.
"A Study of Settling Phenomena by an Optical Obscuration Technique," A. Jawad and D. W. Montville, Modelling and Simulation, paper no. 228-108, pp. 437-440, 1995.
"An Extended Jante Test Procedure for Two-Stroke Piston-Ported Engine Developments," D. W. Montville and B. A. Jawad, Two-Stroke Engine Design and Emissions, SP-1049, pp. 11-24, SAE paper 941679.
"Characteristics of Intermittent Fuel Sprays," B. Jawad, E. Gulari and N. A. Henein, Combust. Flame, Vol. 88, pp. 384-396, 1992.
"Effects of Physical Properties of Fuels on Diesel Injection," N.A. Henein, B. A. Jawad and E. Gulari, J. Eng. for Gas Turbines and Power, Vol. 112, pp. 308-316, 1990.
"Penetration and Drop Size Measurements of Intermittent Sprays by an Optical Obscuration Technique," B. A. Jawad, Ph.D. Dissertation, Wayne State University/Chemical Engineering Department, Detroit, Michigan, May 1988.
"Penetration of Intermittent Fuel Sprays by an Optical Obscuratin Technique," B. A. Jawad, Es. Gulari and N.A. Henein, ASME paper no. 87-WA/HT-15, 1987.
"Determination of Particle Size Distributions Using Light Scattering Techniques," Er. Gulari, A. Annapragada, Es. Gulari and B. A. Jawad, Particle Characterization, Vol. 332, pp. 134-145, 1987.
"Reproducibility and Spray Size Evolution of Diesel Sprays," B. A. Jawad, Es. Gulari and N.A. Henein, Aerosols, pp. 988-990, 1986.
Presentations
"Accountability in student leaning of communication skills – a multi-dimensional approach to assessment of written and oral communications," B. A. Jawad, M. Vaz, and K. Kelch, American Association for Higher Education (AAHE), Denver, Colorado, June 12 – 15, 2004.
"Assessment of Student Learning – Structure, Strategies, and Processes that Transformed One Institution’s Culture," B. A. Jawad, L. Lisiecki, and M. Vaz, American Association for Higher Education (AAHE), Seattle, Washington, June 22 – 24, 2003.
"Future and Exhaust System Improvements to Make Cleaner Burning Two Cycle Engines," B.A. Jawad , and R.S. Smith, SAE, submitted for review, 2001 SAE Future Technology Conference, Costa Mesa, California, August 2001.
"Performance Advantages of a Dry Sump Pump," B. Jawad and M. Hastings, and B. Johnson, 2001 SAE Future Transportation Technology Conference, Costa Mesa, California, August 2001.
"Race Car Fuel Injection System Design," B.A. Jawad , D.C. Marcuzzi, and W.P. Canning, 2001 SAE Future Transportation Technology Conference, Costa Mesa, California August, 2001.
"Two-Stroke Piston Ported Engine Development Using an Altered Jante Test Procedure," B. Jawad and D. Montville, The 24th Annual Meeting of The Fine Particle Society, Chicago, Illinois, August 1993.
"A Diffraction Technique for the Measurement of Penetration and Spray Size of Intermittent Fuel Sprays," Es. Gulari and B. Jawad, ACS, 61st Colloid and Surface Science Symposium, Ann Arbor, Michigan, June 1987.
"Study of Settling Phenomena by Fraunhofer Diffraction Pattern Analysis," B. Jawad and Es. Gulari, 25th Annual Meeting of Fine Particle Society, New Jersey, July 1994.
"Two-Stroke Piston Ported Engine Development Using an Altered Jante Test Procedure," B. Jawad and D. Montville, The 24th Annual Meeting of The Fine Particle Society, Chicago, Illinois, August 1993.
"A Diffraction Technique for the Measurement of Penetration and Spray Size of Intermittent Fuel Sprays," Es. Gulari and B. Jawad, ACS, 61st Colloid and Surface Science Symposium, Ann Arbor, Michigan, June 1987.
"Study of Settling Phenomena by Fraunhofer Diffraction Pattern Analysis," B. Jawad and Es. Gulari, 25th Annual Meeting of Fine Particle Society, New Jersey, July 1994.
Proposals
* NSF Proposal, A Seed for K-16: Science, Technology, Engineering and Math 10 Through 16, June 2004.
* NSF Proposal on Course, Curriculum, and Laboratory Improvement, July 2000.
* NSF Proposal on Course, Curriculum, and Laboratory Improvement, July 1999.
* NSF/SME Joint Proposal with Saint Jose State University and University of Windsor to Enhance Manufacturing Engineering Education through Case Studies (Modules), 1998.
* SME/LTU Proposal for the Manufacturing Education Plan (MEP), 1997.
Reports
* "Assessment at Lawrence Technological University," NCA Assessment Report, 2004-2005.
* "Assessment at Lawrence Technological University," NCA Assessment Report, 2003-2004.
* "Continuing to Develop a Culture of Assessment at Lawrence Technological University," NCA Assessment Report, 2002-2003.
* "Creating a Culture of Assessment at Lawrence Technological University," NCA Assessment Report, 2001-2002.
* "Performance of Diesel Injection Systems with Alternative Fuels," U.S. Army Tank-Automotive Command Research and Development Center, Warren, Michigan, July 1987.
* "Fischer Assay Analyses of the Antrim Oil Shale of the Michigan Basin," Fossil Energy Journal, U.S. Dept. of Energy, Washington, D.C. August, 1980.
Special Training
"Data Analysis, and Laser Doppler Velocimetry, Short Course," TSI Incorporated (Fluid Mechanics Group), Minneapolis, Minnesota, August 2-6, 1993
"Particle Image Velocimetry Short Course," TSI Incorporated (Fluid Mechanics Group), Dearborn Inn, Michigan, March 1995.
“Fire & Boost” Advanced Computational Fluid dynamics (CFD) Training Course, June 18 – 19, 2008, AVL Powertrain Engineering, Inc.
Honors & Awards
| Wayne County Community College | 2006 - Present |
| Advisory Board Member | |
| Lawrence Technological University | April, 2001 |
| The Mary E. & Richard E, Marburger Excellence in Achievement Award | |
| “The 2001 Faculty Member of the Year” | |
| 1995 SAE International Congress & Exposition, Detroit, Michigan | Feb. 27, 1995 |
| Fuel Systems for Fuel Economy and Emissions | |
| “Session Organizer, Cobo Center” | |
| The University of Michigan-Dearborn | 1991-1993 |
| The Dearborn Campus Engineers Award | |
| “Best Instructor of the Year” | |
| Tau Beta Pi. | 1986-Pres. |
| “Member” |
Scientific & Professional Societies
American Society of Mechanical Engineers, member since 1988, 1990
Society of Automotive Engineers, member since 6/26/1979
The Engineering Society of Detroit, member since 1986
American Institute of Chemical Engineers, member since 1981
American Nuclear Society, member since1979 – 1999, 2001
American Chemical Society, member since 10/1/1986
American Institute of Aeronautics and Astronautics, member since 1979
American Institute of Physics, member since 1987
The American Physical Society, member since 1987
The Planetary Society, member since 1981
